services

Technical Information

Get solutions that meet your industry's specific needs

Technical - Cavity wall insulation

Bonded Bead is an expanded polystyrene bead made under strict quality control procedures to satisfy the increasing demand for lightweight, waterproof, solid and trouble free insulation material. For further technical information please see our agreements and NSAI certs below.

Technical - Attic Insulation

There are a number of different products that can be used to insulate your attic. The most common is fibreglass rolls laid between the joists and across the top of the joists to give a finished level of 300mm (12 inches) which achieves the required building regulation U value of 0.16w/m2k.

Details of the well knowns brands can be found by clicking the links here:

http://www.ursa.com

https://www.isover.ie

https://www.knaufinsulation.com

Attic insulation can also be blown in using Rockwool or Warmcel amongst others. Not all installers will have the facility to use blown attic insulation so check out availability. The main difference with blown insulation is that it is easier to get into the smaller nooks and crannies that are inaccessible to the installer.

Details of the well knowns brands can be found by clicking the links here:

http://www.rockwool.com

http://www.warmcel.co.uk

Free Quotation

To get your free quotation from EnviroBead please fill in your details below and we will have someone contact you to organise a free survey.
(+353) 22 22102